cs-CZen-USde-DEpl-PL
+420 469 638 552

Fixmassen Produktion

 Kontakt

Ing. Michal Burda
E-mail: mburda@jfd.cz
Mobile: +420 602 788 020

Spliced Veneer / Veneer Layon

Veneer is thin piece of wood with 0,55 - 1,5 mm thickness, which is use for production of furniture, panels, doors, flooring, etc.

1. Sorting of Veneer – veneer sorting is under way in the stock according the follow parameters
Dimension of bundles - length and width - called length sorting
Quality and structure of material - called qualitative sorting

During sorting could be combine both parameters - it is up to requirements of our costumer

2. Cutting
Crosswise cutting - bundles of veneer with XY length are cut by knife of scissor to required length with technical needed "oversize".
Lengthwise cutting - the bundle is cut from both sides - from original width XY to required width.

This operation could be making on single - knife guillotines or double - knives guillotines.

3. Gluing and splicing
Putting glue - ready bundle is put into veneer package glue applicator, where the glue is applied to edges of bundle (longer size of bundle) by 2 rotated fluted rollers. The bundles with glue are place to two-tier conveyor belt (for preparing of glue for next operation). These prepared bundles of veneer are putting (according to requirements of costumers) into splicer, where the glue is active by pressing of sheets of veneer together and by warm. It is not occurred the joint - front and back side are the same.
Splicing by fibre - it is the same way of splicing but the gluing application is missing, and the bundles of veneer are putting direct to splicer (fibre splicer) - Küper. On the back side is occurred the joint zig-zag.

4. Final cutting and fix of edges
It is last operation. The edges of layons are fixed by fuse fibre, which protected the layons for next manipulation. If necessary the oversize of sheet in layons are cut to one dimension.

5. Final control
The operation, where the layons are checking according to demand of costumer (100 % check or random check).

6. Packaging and expedition
The ready checked layons are packed on pallets with needed documents - type of pallet, marking and so on is according to costumer´s requirements.
Then pallets are packed to black stretch foil, strapped and sent to costumers.

Motto

Erreichung und Aufrechterhaltung eines Systems der Qualität und ökologische Grundsätze des zur Verfügung gestellten Dienstleistungen und Produkte auf das vom Kunden benötigten Niveaus, ist das Ergebnis einer systematischen Zusammenarbeit aller Mitarbeiter des Unternehmens.

 

Zertifikation

   
   
   

 

  

Wir sind stolz Sponsoren


Rytmus - do života lidí s handicapem

Dětské oddělení Nemocnice Chrudim 
JFD finančně přispěla na pomoc po povodních v roce 2013